Sonoff Zigbee Bridge pro

Flash tasmota to the ZB Bridge pro is more than easy instead of non-pro version, lets follow ->

Connect board of ZB Bridge to the programmer.

Sonoff ZB Bridge PRO	FTD programmer
3V3	Vcc/3V3
GND	GND
RX	TX
TX	RX
GPIO00	GND (first run-enable flash mode)

Download tasmota32-zbbrdgpro.factory.bin from https://ota.tasmota.com/tasmota32/release/ [[1]]

python3 /path to esptool/esptool.py --port /dev/ttyUSB0 write_flash 0x0 /path to bin file/tasmota32-zbbrdgpro.factory.bin

Turn off zb bridge and Disconnect GPIO00 from GND.

Turn on zb bridge and setup wifi. 

For HomeAssistant -> ZHA or Zigbee2MQTT, open the web UI of the device and navigate to Configuration -> Auto-configuration. Select Sonoff ZBPro TCP from the drop-down and click Apply Configuration.
The device will restart and will be automagically configured.



sources
https://notenoughtech.com/home-automation/tasmota-on-sonoff-zb-bridge-pro/#flash [[2]]
https://zigbee.blakadder.com/Sonoff_ZBBridge-P.html [[3]]