Sonoff Zigbee Bridge pro
Flash tasmota to the ZB Bridge pro is more than easy instead of non-pro version, lets follow ->
Connect board of ZB Bridge to the programmer.
| Sonoff ZB Bridge PRO | FTD programmer |
|---|---|
| 3V3 | Vcc/3V3 |
| GND | GND |
| RX | TX |
| TX | RX |
| GPIO00 | GND (first run-enable flash mode) |
Download tasmota32-zbbrdgpro.factory.bin from https://ota.tasmota.com/tasmota32/release/ [[1]]
python3 /path to esptool/esptool.py --port /dev/ttyUSB0 write_flash 0x0 /path to bin file/tasmota32-zbbrdgpro.factory.bin
Turn off zb bridge and Disconnect GPIO00 from GND.
Turn on zb bridge and setup wifi.
For HomeAssistant -> ZHA or Zigbee2MQTT, open the web UI of the device and navigate to Configuration -> Auto-configuration. Select Sonoff ZBPro TCP from the drop-down and click Apply Configuration.
The device will restart and will be automagically configured.
Connecting to Home Assistant with ZHA -> In Home Assistant (requires version 0.113+) go to Configuration - Integrations, click the + icon, search for ZHA integration and select it.
sources https://notenoughtech.com/home-automation/tasmota-on-sonoff-zb-bridge-pro/#flash [[2]] https://zigbee.blakadder.com/Sonoff_ZBBridge-P.html [[3]]