Sonoff Zigbee Bridge pro: Porovnání verzí
Skočit na navigaci
Skočit na vyhledávání
založena nová stránka s textem „ Category:Tasmota“ |
Bez shrnutí editace |
||
| Řádek 1: | Řádek 1: | ||
connect board of ZB Bridge to the programmer | |||
<pre>Sonoff ZB Bridge PRO FTD programmer | |||
{| class="wikitable" | |||
|+ Caption text | |||
|- | |||
! Sonoff ZB Bridge PRO !! FTD programmer | |||
|- | |||
| 3V3 || Vcc/3V3 | |||
|- | |||
| GND || GND | |||
|- | |||
| RX || TX | |||
|- | |||
| TX || RX | |||
|- | |||
| GPIO00 || GND (first run-enable flash mode) | |||
|} | |||
</pre> | |||
<pre>python3 /path to esptool/esptool.py --port /dev/ttyUSB0 write_flash 0x0 /path to bin file/tasmota32-zbbrdgpro.factory.bin | |||
[[Category:Tasmota]] | [[Category:Tasmota]] | ||
Verze z 17. 2. 2026, 13:26
connect board of ZB Bridge to the programmer
Sonoff ZB Bridge PRO FTD programmer
{| class="wikitable"
|+ Caption text
|-
! Sonoff ZB Bridge PRO !! FTD programmer
|-
| 3V3 || Vcc/3V3
|-
| GND || GND
|-
| RX || TX
|-
| TX || RX
|-
| GPIO00 || GND (first run-enable flash mode)
|}
python3 /path to esptool/esptool.py --port /dev/ttyUSB0 write_flash 0x0 /path to bin file/tasmota32-zbbrdgpro.factory.bin