Sonoff Zigbee Bridge pro: Porovnání verzí
Skočit na navigaci
Skočit na vyhledávání
Bez shrnutí editace |
Bez shrnutí editace |
||
| (Nejsou zobrazeny 3 mezilehlé verze od stejného uživatele.) | |||
| Řádek 1: | Řádek 1: | ||
Flash tasmota to the ZB Bridge pro is more than easy instead of non-pro version, lets follow -> | |||
* Connect board of ZB Bridge to the programmer. | |||
{| class="wikitable" | {| class="wikitable" | ||
| Řádek 15: | Řádek 16: | ||
| GPIO00 || GND (first run-enable flash mode) | | GPIO00 || GND (first run-enable flash mode) | ||
|} | |} | ||
[[Soubor:zbbridge-pinout.png]] | |||
* Download tasmota32-zbbrdgpro.factory.bin from https://ota.tasmota.com/tasmota32/release/ [[https://ota.tasmota.com/tasmota32/release/]] | |||
<pre>python3 /path to esptool/esptool.py --port /dev/ttyUSB0 write_flash 0x0 /path to bin file/tasmota32-zbbrdgpro.factory.bin</pre> | |||
* Turn off zb bridge and Disconnect GPIO00 from GND. | |||
* Turn on zb bridge and setup wifi. | |||
* For HomeAssistant -> ZHA or Zigbee2MQTT, open the web UI of the device and navigate to '''Configuration -> Auto-configuration'''. Select '''Sonoff ZBPro TCP''' from the drop-down and click Apply Configuration. | |||
The device will restart and will be automagically configured. | |||
* Connecting to Home Assistant with ZHA -> In Home Assistant (requires version 0.113+) go to Configuration - Integrations, click the + icon, search for ZHA integration and select it. | |||
[[Soubor:zbbridge-has-zha.png]] | |||
sources | |||
https://notenoughtech.com/home-automation/tasmota-on-sonoff-zb-bridge-pro/#flash [[https://notenoughtech.com/home-automation/tasmota-on-sonoff-zb-bridge-pro/#flash]] | |||
https://zigbee.blakadder.com/Sonoff_ZBBridge-P.html [[https://zigbee.blakadder.com/Sonoff_ZBBridge-P.html]] | |||
[[Category:Tasmota]] | [[Category:Tasmota]] | ||
Aktuální verze z 17. 2. 2026, 13:43
Flash tasmota to the ZB Bridge pro is more than easy instead of non-pro version, lets follow ->
- Connect board of ZB Bridge to the programmer.
| Sonoff ZB Bridge PRO | FTD programmer |
|---|---|
| 3V3 | Vcc/3V3 |
| GND | GND |
| RX | TX |
| TX | RX |
| GPIO00 | GND (first run-enable flash mode) |
- Download tasmota32-zbbrdgpro.factory.bin from https://ota.tasmota.com/tasmota32/release/ [[1]]
python3 /path to esptool/esptool.py --port /dev/ttyUSB0 write_flash 0x0 /path to bin file/tasmota32-zbbrdgpro.factory.bin
- Turn off zb bridge and Disconnect GPIO00 from GND.
- Turn on zb bridge and setup wifi.
- For HomeAssistant -> ZHA or Zigbee2MQTT, open the web UI of the device and navigate to Configuration -> Auto-configuration. Select Sonoff ZBPro TCP from the drop-down and click Apply Configuration.
The device will restart and will be automagically configured.
- Connecting to Home Assistant with ZHA -> In Home Assistant (requires version 0.113+) go to Configuration - Integrations, click the + icon, search for ZHA integration and select it.
sources
https://notenoughtech.com/home-automation/tasmota-on-sonoff-zb-bridge-pro/#flash [[2]]