Zobrazení zdroje stránky Sonoff Zigbee Bridge pro

Flash tasmota to the ZB Bridge pro is more than easy instead of non-pro version, lets follow -> 

* Connect board of ZB Bridge to the programmer.

{| class="wikitable"
! Sonoff ZB Bridge PRO !! FTD programmer
|-
| 3V3 || Vcc/3V3
|-
| GND || GND
|-
| RX || TX
|-
| TX || RX
|-
| GPIO00 || GND (first run-enable flash mode)
|}
[[Soubor:zbbridge-pinout.png]]

* Download tasmota32-zbbrdgpro.factory.bin from https://ota.tasmota.com/tasmota32/release/ [[https://ota.tasmota.com/tasmota32/release/]]


<pre>python3 /path to esptool/esptool.py --port /dev/ttyUSB0 write_flash 0x0 /path to bin file/tasmota32-zbbrdgpro.factory.bin</pre>


* Turn off zb bridge and Disconnect GPIO00 from GND.


* Turn on zb bridge and setup wifi. 


* For HomeAssistant -> ZHA or Zigbee2MQTT, open the web UI of the device and navigate to '''Configuration -> Auto-configuration'''. Select '''Sonoff ZBPro TCP''' from the drop-down and click Apply Configuration.
The device will restart and will be automagically configured.


* Connecting to Home Assistant with ZHA -> In Home Assistant (requires version 0.113+) go to Configuration - Integrations, click the + icon, search for ZHA integration and select it.

[[Soubor:zbbridge-has-zha.png]]

sources

https://notenoughtech.com/home-automation/tasmota-on-sonoff-zb-bridge-pro/#flash [[https://notenoughtech.com/home-automation/tasmota-on-sonoff-zb-bridge-pro/#flash]]

https://zigbee.blakadder.com/Sonoff_ZBBridge-P.html [[https://zigbee.blakadder.com/Sonoff_ZBBridge-P.html]]
[[Category:Tasmota]]